Agent · cyberresiliens-2024-2847-13

Cyberresiliensakten artikel 13: Obligations of manufacturers

Structural tree: the article's own paragraphs, verbatim.

CELEX 32024R2847 · 2026-08-18 · Weight 78 · minimal-risk

ExtendedOperational weight but lower priority. Metered by volume, not per call, once metering is switched on.

CyberresiliensaktenOfficial source

Inputs

• in_scopeThe article applies to the situationboolean
• punktParagraph of the articleenum (1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14)

Rule tree

1. If: alla(in_scope = true, punkt = 1)

   Paragraph 1 applies

   1. When placing a product with digital elements on the market, manufacturers shall ensure that it has been designed, developed and produced in accordance with the essential cybersecurity requirements set out in Part I of Annex I.

   Paragraph 1

2. If: alla(in_scope = true, punkt = 2)

   Paragraph 2 applies

   2. For the purpose of complying with paragraph 1, manufacturers shall undertake an assessment of the cybersecurity risks associated with a product with digital elements and take the outcome of that assessment into account during the planning, design, development, production, delivery and maintenance phases of the product with digital elements with a view to minimising cybersecurity risks, preventing incidents and min…

   Paragraph 2

3. If: alla(in_scope = true, punkt = 3)

   Paragraph 3 applies

   3. The cybersecurity risk assessment shall be documented and updated as appropriate during a support period to be determined in accordance with paragraph 8 of this Article. That cybersecurity risk assessment shall comprise at least an analysis of cybersecurity risks based on the intended purpose and reasonably foreseeable use, as well as the conditions of use, of the product with digital elements, such as the operati…

   Paragraph 3

4. If: alla(in_scope = true, punkt = 4)

   Paragraph 4 applies

   4. When placing a product with digital elements on the market, the manufacturer shall include the cybersecurity risk assessment referred to in paragraph 3 of this Article in the technical documentation required pursuant to Article 31 and Annex VII. For products with digital elements as referred to in Article 12, which are also subject to other Union legal acts, the cybersecurity risk assessment may be part of the ris…

   Paragraph 4

5. If: alla(in_scope = true, punkt = 5)

   Paragraph 5 applies

   5. For the purpose of complying with paragraph 1, manufacturers shall exercise due diligence when integrating components sourced from third parties so that those components do not compromise the cybersecurity of the product with digital elements, including when integrating components of free and open-source software that have not been made available on the market in the course of a commercial activity.

   Paragraph 5

6. If: alla(in_scope = true, punkt = 6)

   Paragraph 6 applies

   6. Manufacturers shall, upon identifying a vulnerability in a component, including in an open source-component, which is integrated in the product with digital elements report the vulnerability to the person or entity manufacturing or maintaining the component, and address and remediate the vulnerability in accordance with the vulnerability handling requirements set out in Part II of Annex I. Where manufacturers have…

   Paragraph 6

7. If: alla(in_scope = true, punkt = 7)

   Paragraph 7 applies

   7. The manufacturers shall systematically document, in a manner that is proportionate to the nature and the cybersecurity risks, relevant cybersecurity aspects concerning the products with digital elements, including vulnerabilities of which they become aware and any relevant information provided by third parties, and shall, where applicable, update the cybersecurity risk assessment of the products.

   Paragraph 7

8. If: alla(in_scope = true, punkt = 8)

   Paragraph 8 applies

   8. Manufacturers shall ensure, when placing a product with digital elements on the market, and for the support period, that vulnerabilities of that product, including its components, are handled effectively and in accordance with the essential cybersecurity requirements set out in Part II of Annex I.

   Paragraph 8

9. If: alla(in_scope = true, punkt = 9)

   Paragraph 9 applies

   Manufacturers shall determine the support period so that it reflects the length of time during which the product is expected to be in use, taking into account, in particular, reasonable user expectations, the nature of the product, including its intended purpose, as well as relevant Union law determining the lifetime of products with digital elements. When determining the support period, manufacturers may also take i…

   Paragraph 9

10. If: alla(in_scope = true, punkt = 10)

    Paragraph 10 applies

    Without prejudice to the second subparagraph, the support period shall be at least five years. Where the product with digital elements is expected to be in use for less than five years, the support period shall correspond to the expected use time.

    Paragraph 10

11. If: alla(in_scope = true, punkt = 11)

    Paragraph 11 applies

    Taking into account ADCO recommendations as referred to in Article 52(16), the Commission may adopt delegated acts in accordance with Article 61 to supplement this Regulation by specifying the minimum support period for specific product categories where the market surveillance data suggests inadequate support periods.

    Paragraph 11

12. If: alla(in_scope = true, punkt = 12)

    Paragraph 12 applies

    Manufacturers shall include the information that was taken into account to determine the support period of a product with digital elements in the technical documentation as set out in Annex VII.

    Paragraph 12

13. If: alla(in_scope = true, punkt = 13)

    Paragraph 13 applies

    Manufacturers shall have appropriate policies and procedures, including coordinated vulnerability disclosure policies, referred to in Part II, point (5), of Annex I to process and remediate potential vulnerabilities in the product with digital elements reported from internal or external sources.

    Paragraph 13

14. If: alla(in_scope = true, punkt = 14)

    Paragraph 14 applies

    9. Manufacturers shall ensure that each security update, as referred to in Part II, point (8), of Annex I, which has been made available to users during the support period, remains available after it has been issued for a minimum of 10 years or for the remainder of the support period, whichever is longer.

    Paragraph 14

If no rule matches: The article is not stated to apply, or no paragraph is selected. The agent abstains rather than guesses.

The article text as read

1. 11. When placing a product with digital elements on the market, manufacturers shall ensure that it has been designed, developed and produced in accordance with the essential cybersecurity requirements set out in Part I of Annex I.
2. 22. For the purpose of complying with paragraph 1, manufacturers shall undertake an assessment of the cybersecurity risks associated with a product with digital elements and take the outcome of that assessment into account during the planning, design, development, production, delivery and maintenance phases of the product with digital elements with a view to minimising cybersecurity risks, preventing incidents and minimising their impact, including in relation to the health and safety of users.
3. 33. The cybersecurity risk assessment shall be documented and updated as appropriate during a support period to be determined in accordance with paragraph 8 of this Article. That cybersecurity risk assessment shall comprise at least an analysis of cybersecurity risks based on the intended purpose and reasonably foreseeable use, as well as the conditions of use, of the product with digital elements, such as the operational environment or the assets to be protected, taking into account the length of time the product is expected to be in use. The cybersecurity risk assessment shall indicate whether and, if so in what manner, the security requirements set out in Part I, point (2), of Annex I are applicable to the relevant product with digital elements and how those requirements are implemented as informed by the cybersecurity risk assessment. It shall also indicate how the manufacturer is to apply Part I, point (1), of Annex I and the vulnerability handling requirements set out in Part II of Annex I.
4. 44. When placing a product with digital elements on the market, the manufacturer shall include the cybersecurity risk assessment referred to in paragraph 3 of this Article in the technical documentation required pursuant to Article 31 and Annex VII. For products with digital elements as referred to in Article 12, which are also subject to other Union legal acts, the cybersecurity risk assessment may be part of the risk assessment required by those Union legal acts. Where certain essential cybersecurity requirements are not applicable to the product with digital elements, the manufacturer shall include a clear justification to that effect in that technical documentation.
5. 55. For the purpose of complying with paragraph 1, manufacturers shall exercise due diligence when integrating components sourced from third parties so that those components do not compromise the cybersecurity of the product with digital elements, including when integrating components of free and open-source software that have not been made available on the market in the course of a commercial activity.
6. 66. Manufacturers shall, upon identifying a vulnerability in a component, including in an open source-component, which is integrated in the product with digital elements report the vulnerability to the person or entity manufacturing or maintaining the component, and address and remediate the vulnerability in accordance with the vulnerability handling requirements set out in Part II of Annex I. Where manufacturers have developed a software or hardware modification to address the vulnerability in that component, they shall share the relevant code or documentation with the person or entity manufacturing or maintaining the component, where appropriate in a machine-readable format.
7. 77. The manufacturers shall systematically document, in a manner that is proportionate to the nature and the cybersecurity risks, relevant cybersecurity aspects concerning the products with digital elements, including vulnerabilities of which they become aware and any relevant information provided by third parties, and shall, where applicable, update the cybersecurity risk assessment of the products.
8. 88. Manufacturers shall ensure, when placing a product with digital elements on the market, and for the support period, that vulnerabilities of that product, including its components, are handled effectively and in accordance with the essential cybersecurity requirements set out in Part II of Annex I.
9. 9Manufacturers shall determine the support period so that it reflects the length of time during which the product is expected to be in use, taking into account, in particular, reasonable user expectations, the nature of the product, including its intended purpose, as well as relevant Union law determining the lifetime of products with digital elements. When determining the support period, manufacturers may also take into account the support periods of products with digital elements offering a similar functionality placed on the market by other manufacturers, the availability of the operating environment, the support periods of integrated components that provide core functions and are sourced from third parties as well as relevant guidance provided by the dedicated administrative cooperation group (ADCO) established pursuant to Article 52(15) and the Commission. The matters to be taken into account in order to determine the support period shall be considered in a manner that ensures proportionality.
10. 10Without prejudice to the second subparagraph, the support period shall be at least five years. Where the product with digital elements is expected to be in use for less than five years, the support period shall correspond to the expected use time.
11. 11Taking into account ADCO recommendations as referred to in Article 52(16), the Commission may adopt delegated acts in accordance with Article 61 to supplement this Regulation by specifying the minimum support period for specific product categories where the market surveillance data suggests inadequate support periods.
12. 12Manufacturers shall include the information that was taken into account to determine the support period of a product with digital elements in the technical documentation as set out in Annex VII.
13. 13Manufacturers shall have appropriate policies and procedures, including coordinated vulnerability disclosure policies, referred to in Part II, point (5), of Annex I to process and remediate potential vulnerabilities in the product with digital elements reported from internal or external sources.
14. 149. Manufacturers shall ensure that each security update, as referred to in Part II, point (8), of Annex I, which has been made available to users during the support period, remains available after it has been issued for a minimum of 10 years or for the remainder of the support period, whichever is longer.

No legal advice. Deterministisk regeluppslagning. Ingen juridisk rådgivning, inget efterlevnadsbeslut, ingen bedömning av ett enskilt ärende.

Citation: 32024R2847 art. 13, Obligations of manufacturers. ExploreWorld Legal, https://legal.exploreworldai.com/agent/cyberresiliens-2024-2847/artikel-13 (hämtad 2026-08-18, bevis sha256:8f48e1292dd556f9, bygge legal-2026-08-25).