Agent · cyberresiliens-2024-2847-32

Cyberresiliensakten artikel 32: Conformity assessment procedures for products with digital elements

Strukturelt tre: artikkelens egne punkter, ordrett.

CELEX 32024R2847 · 2026-08-18 · Vekt 78 · minimal-risk

ExtendedOperational weight but lower priority. Metered by volume, not per call, once metering is switched on.

CyberresiliensaktenOffisiell kilde

Inndata

• in_scopeThe article applies to the situationboolean
• punktParagraph of the articleenum (1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14)

Regeltre

1. Hvis: alla(in_scope = true, punkt = 1)

   Paragraph 1 applies

   1. The manufacturer shall perform a conformity assessment of the product with digital elements and the processes put in place by the manufacturer to determine whether the essential cybersecurity requirements set out in Annex I are met. The manufacturer shall demonstrate conformity with the essential cybersecurity requirements by using any of the following procedures:

   Punkt 1

2. Hvis: alla(in_scope = true, punkt = 2)

   Paragraph 2 applies

   (a)

   Punkt 2

3. Hvis: alla(in_scope = true, punkt = 3)

   Paragraph 3 applies

   the internal control procedure (based on module A) set out in Annex VIII;

   Punkt 3

4. Hvis: alla(in_scope = true, punkt = 4)

   Paragraph 4 applies

   (b)

   Punkt 4

5. Hvis: alla(in_scope = true, punkt = 5)

   Paragraph 5 applies

   the EU-type examination procedure (based on module B) set out in Annex VIII followed by conformity to EU-type based on internal production control (based on module C) set out in Annex VIII;

   Punkt 5

6. Hvis: alla(in_scope = true, punkt = 6)

   Paragraph 6 applies

   (c)

   Punkt 6

7. Hvis: alla(in_scope = true, punkt = 7)

   Paragraph 7 applies

   a conformity assessment based on full quality assurance (based on module H) set out in Annex VIII; or

   Punkt 7

8. Hvis: alla(in_scope = true, punkt = 8)

   Paragraph 8 applies

   (d)

   Punkt 8

9. Hvis: alla(in_scope = true, punkt = 9)

   Paragraph 9 applies

   where available and applicable, a European cybersecurity certification scheme pursuant to Article 27(9).

   Punkt 9

10. Hvis: alla(in_scope = true, punkt = 10)

    Paragraph 10 applies

    2. Where, in assessing the compliance of an important product with digital elements that falls under class I as set out in Annex III and the processes put in place by its manufacturer with the essential cybersecurity requirements set out in Annex I, the manufacturer has not applied or has applied only in part harmonised standards, common specifications or European cybersecurity certification schemes at assurance leve…

    Punkt 10

11. Hvis: alla(in_scope = true, punkt = 11)

    Paragraph 11 applies

    (a)

    Punkt 11

12. Hvis: alla(in_scope = true, punkt = 12)

    Paragraph 12 applies

    the EU-type examination procedure (based on module B) set out in Annex VIII followed by conformity to EU-type based on internal production control (based on module C) set out in Annex VIII; or

    Punkt 12

13. Hvis: alla(in_scope = true, punkt = 13)

    Paragraph 13 applies

    (b)

    Punkt 13

14. Hvis: alla(in_scope = true, punkt = 14)

    Paragraph 14 applies

    a conformity assessment based on full quality assurance (based on module H) set out in Annex VIII.

    Punkt 14

Hvis ingen regel treffer: The article is not stated to apply, or no paragraph is selected. The agent abstains rather than guesses.

Artikkelteksten som ble lest

1. 11. The manufacturer shall perform a conformity assessment of the product with digital elements and the processes put in place by the manufacturer to determine whether the essential cybersecurity requirements set out in Annex I are met. The manufacturer shall demonstrate conformity with the essential cybersecurity requirements by using any of the following procedures:
2. 2(a)
3. 3the internal control procedure (based on module A) set out in Annex VIII;
4. 4(b)
5. 5the EU-type examination procedure (based on module B) set out in Annex VIII followed by conformity to EU-type based on internal production control (based on module C) set out in Annex VIII;
6. 6(c)
7. 7a conformity assessment based on full quality assurance (based on module H) set out in Annex VIII; or
8. 8(d)
9. 9where available and applicable, a European cybersecurity certification scheme pursuant to Article 27(9).
10. 102. Where, in assessing the compliance of an important product with digital elements that falls under class I as set out in Annex III and the processes put in place by its manufacturer with the essential cybersecurity requirements set out in Annex I, the manufacturer has not applied or has applied only in part harmonised standards, common specifications or European cybersecurity certification schemes at assurance level at least ‘substantial’ as referred to in Article 27, or where such harmonised standards, common specifications or European cybersecurity certification schemes do not exist, the product with digital elements concerned and the processes put in place by the manufacturer shall be submitted with regard to those essential cybersecurity requirements to either of the following procedures:
11. 11(a)
12. 12the EU-type examination procedure (based on module B) set out in Annex VIII followed by conformity to EU-type based on internal production control (based on module C) set out in Annex VIII; or
13. 13(b)
14. 14a conformity assessment based on full quality assurance (based on module H) set out in Annex VIII.

Ingen rådgivning. Deterministisk regeluppslagning. Ingen juridisk rådgivning, inget efterlevnadsbeslut, ingen bedömning av ett enskilt ärende.

Sitering: 32024R2847 art. 32, Conformity assessment procedures for products with digital elements. ExploreWorld Legal, https://legal.exploreworldai.com/agent/cyberresiliens-2024-2847/artikel-32 (hämtad 2026-08-18, bevis sha256:f3068bd8cbd9f35b, bygge legal-2026-08-25).