GPSR, Article 9, NO
1. When placing their products on the market, manufacturers shall ensure that those products have been designed and manufactured in accordance with the general safety requirement laid down in Article 5.
2. Before placing their products on the market, manufacturers shall carry out an internal risk analysis and draw up technical documentation containing at least a general description of the product and its essential characteristics relevant for assessing its safety.
Where appropriate with regard to possible risks related to the product, the technical documentation referred to in the first subparagraph shall also contain, as applicable:
(a)
an analysis of the possible risks related to the product and the solutions adopted to eliminate or mitigate such risks, including the outcome of any reports related to tests conducted by the manufacturer or by another party on their behalf; and
(b)
the list of any relevant European standards as referred to in Article 7(1), point (a), or the other elements referred to in Article 7(1), point (b) or Article 8, applied to meet the general safety requirement laid down in Article 5.
Where any of the European standards, health and safety requirements or elements as referred to in Article 7(1) or Article 8 have been only partly applied, the manufacturers shall identify the parts which have been applied.
3. Manufacturers shall ensure that the technical documentation referred to in paragraph 2 is up to date. They shall keep that documentation at the disposal of the market surveillance authorities for a period of 10 years after the product has been placed on the market and make that documentation available to those authorities upon request.
4. Manufacturers shall ensure that procedures are in place for products produced in series to remain in conformity with the general safety requirement laid down in Article 5.
5. Manufacturers shall ensure that their products bear a type, batch or serial number or other element enabling the identification of the product and which is easily visible and legible for consumers, or, where the size or nature of the product does not allow it, that the required information is provided on the packaging or in a document accompanying the product.
6. Manufacturers shall indicate their name, their registered trade name or registered trade mark, their postal and electronic address and, where different, the postal or electronic address of the single contact point at which they can be contacted. That information shall be placed on the product or, where that is not possible, on its packaging or in a document accompanying the product.
7. Manufacturers shall ensure that their product is accompanied by clear instructions and safety information in a language which can be easily understood by consumers, as determined by the Member State in which the product is made available on the market. That requirement shall not apply where the product can be used safely and as intended by the manufacturer without such instructions and safety information.
8. Where a manufacturer considers or has reason to believe, on the basis of the information in that manufacturer’s possession, that a product which it has placed on the market is a dangerous product, the manufacturer shall immediately:
Version: 1a47e0602091bc60
SHA-256: sha256:1a47e0602091bc601943b4ddc63b9a2baca568f7a5d9d02c5e9a44acf48e919c
- Article 1
- Article 2
- Article 3
- Article 4
- Article 5
- Article 6
- Article 7
- Article 8
- Article 10
- Article 11
- Article 12
- Article 13
- Article 14
- Article 15
- Article 16
- Article 17
- Article 18
- Article 19
- Article 20
- Article 21
- Article 22
- Article 23
- Article 24
- Article 25
- Article 26
- Article 27
- Article 28
- Article 29
- Article 30
- Article 31
- Article 32
- Article 33
- Article 34
- Article 35
- Article 36
- Article 37
- Article 38
- Article 39
- Article 40
- Article 41
- Article 42
- Article 43
- Article 44
- Article 45
- Article 46
- Article 47
- Article 48
- Article 49
- Article 50
- Article 51
- Article 52
Source: NovaCopilot